Download or read book Failure Analysis and Mechanical Tests of Failed Aluminum Alloy 7277 Rivets on Armored Vehicle Launched Bridges written by Howard E. Homer and published by . This book was released on 1996-09-01 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: A number of the manufactured buttonheads of the 0.75-in-diameter hot- driven aluminum rivets (made of alloy 7277) were found to have fallen off Class 60 Armored Vehicle Launched Bridges (AVLB) that had been employed in Saudi Arabia during Operation Desert Storm. The presence of white corrosion deposits observed on the fractured surfaces of the failed heads indicated corrosion. The objectives of the work were to determine the cause of rivet head failures and conduct a number of mechanical tests to evaluate the integrity of the corroded rivets without their heads or with cracked heads. Corroded aluminum rivet samples were obtained, examined, and tested. The rivet head failures were caused by stress corrosion cracking initiated in the sharp head-to-shank fillets that acted as stress raisers. Depending on the amounts of the white corrosion products formed, they bound the headless rivet shanks in the rivet holes. No failures similar to those in the rivet heads were found in the rivet shanks. With corroded shanks remaining in the rivet holes of the bridge parts and with major stresses acting in shear on the shanks, the corroded rivet shanks or the crack rivet buttonheads can still allow the bridge to function satisfactorily until the corroded aluminum rivets are replaced.